 |
| Quantity: | |
|---|---|
Indoor smokeless matting agent M-13
It is suitable for polyester/epoxy mixed system with gloss above 10 degree.does not consume epoxy resin, has low cost of milling, does not contain wax, has plump and delicate surface, and has high reactivity. Curing at lower temperature has little influence on gloss, but it is necessary to strictly control the stability of production material temperature.
●Main components: Acrylic resin and catalyst
●Technical parameters Appearance: light yellow powder
Bulk density: 450~550g/l
●Product features :Very little smoke from milling and baking, polyester/epoxy mixed system with gloss above 10° does not consume epoxy resin, milling low cost, no wax, plump and delicate surface, high reactivity, low temperature curing has little effect on gloss,However, it is necessary to strictly control the stability of the production material temperature.
●Usage method: Extrude inside, add 1~3.1% in combination with a proper amount of semi-chemical matting agent to improve the leveling performance of the coating film, extend powder storage time.
| Material Safety Data Sheet : |  M13-MSDS Chinese.pdf | M13-MSDS English.pdf |
| Technical Data Sheet : |  M13-TDS Chinese.pdf |  M13 TDS English.pdf |
Indoor smokeless matting agent M-13
It is suitable for polyester/epoxy mixed system with gloss above 10 degree.does not consume epoxy resin, has low cost of milling, does not contain wax, has plump and delicate surface, and has high reactivity. Curing at lower temperature has little influence on gloss, but it is necessary to strictly control the stability of production material temperature.
●Main components: Acrylic resin and catalyst
●Technical parameters Appearance: light yellow powder
Bulk density: 450~550g/l
●Product features :Very little smoke from milling and baking, polyester/epoxy mixed system with gloss above 10° does not consume epoxy resin, milling low cost, no wax, plump and delicate surface, high reactivity, low temperature curing has little effect on gloss,However, it is necessary to strictly control the stability of the production material temperature.
●Usage method: Extrude inside, add 1~3.1% in combination with a proper amount of semi-chemical matting agent to improve the leveling performance of the coating film, extend powder storage time.
| Material Safety Data Sheet : | M13-MSDS Chinese.pdf | M13-MSDS English.pdf |
| Technical Data Sheet : | M13-TDS Chinese.pdf | M13 TDS English.pdf |