Kingcham
What are the practices for using resin matting agents?
You are here: Home » Media » Expert Ideas » What are the practices for using resin matting agents?

What are the practices for using resin matting agents?

Views: 0     Author: Site Editor     Publish Time: 2023-07-13      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button
What are the practices for using resin matting agents?

Resin matting agents are a commonly used material in a variety of industries, ranging from aerospace to automotive. They are used to provide a durable protective coating on surfaces, allowing them to withstand exposure to a wide range of elements. While applying resin matting agents is a straightforward process, there are a variety of techniques and practices that can help to ensure the best results.


l Select a matting agent that will best suit the application

l Prepare the surface area to ensure maximum adhesion

l Measure and mix the resin and matting agent in the correct ratio

l Apply the mixture in an even and uniform manner

l Allow the mixture to cure before use or further processing


Select a matting agent that will best suit the application


Selecting the correct matting agent for a given application is essential for achieving the desired results. Before selecting a matting agent, it is important to consider the target surface, desired gloss level, and durability requirements. Once the desired outcome is established, the appropriate agents can be chosen from a wide variety of available options. It is also important to consider the application environment when selecting a matting agent, as certain agents may not perform as expected in certain conditions.


Prepare the surface area to ensure maximum adhesion


Prior to applying a resin matting agent, it is important to ensure that the surface area is adequately prepared for maximum adhesion. This can be achieved by cleaning and degreasing the surface with a suitable solvent. If the surface contains any contaminants, such as dirt, dust or rust, these must be removed as well. Once the surface is properly prepared, it is important to make sure that it is dry and free from any moisture. Doing this will ensure that the resin matting agent adheres properly, creating a strong bond.


Measure and mix the resin and matting agent in the correct ratio


Before using the resin matting agent, it is important to measure and mix it in the correct ratio. The ratio of resin and matting agent will vary depending on the type of product being created. It is important to follow the directions for the specific product being used. The resin and matting agent should be measured on a scale for accuracy. Once the proper ratio is determined, the resin and matting agent should be mixed together. The mixture should be stirred thoroughly until the matting agent has been incorporated into the resin completely. This will ensure a consistent and reliable end product.


Apply the mixture in an even and uniform manner


After preparing the mixture of resin matting agents according to the instructions provided, ensure that it is applied in an even and uniform manner. This can be done using a brush or roller, depending on the surface. If the surface is uneven, use a brush to ensure the mixture is spread evenly. If the surface is smooth, use a roller to create an even finish. It is important to ensure that the mixture is applied in an even and uniform manner in order to achieve the desired finish.


Allow the mixture to cure before use or further processing


The fifth and final step in the process of using resin matting agents is to allow the mixture to cure before use or further processing. When using an appropriate curing agent and a controlled curing process, the curing time may be as short as one hour. However, if the curing process is too accelerated, the performance of the matting agent may be compromised. Therefore, it is important to adhere to the manufacturer's instructions and allow the appropriate curing time before use or further processing.


Using resin matting agents is a good way to keep your surfaces clean and looking great. If you don’t know how to use it, you can find it. Welcome to Anhui Kingcham New Materials Co., Ltd.

Kingcham is the leading global supplier of innovative powder coating additive companies that combine R&D, manufacturing, sales, and service.

QUICK LINKS

PRODUCT CATEGORY

GET IN TOUCH

PHONE

+86-551-68113128

EMAIL

sales@kingcham.com

ADDRESS

Room 1305 Jinqian Square , No. 4680 Jinzhai Road, Shushan District, Hefei, 230026, Anhui, China.
Copyright © 2022 Anhui Kingcham New Materials Co., Ltd.  All rights reserved. Support by Leadong Sitemap  皖ICP备14020930号