Kingcham
The Latest Products Collection of Powder Coating Additives
You are here: Home » Media » Expert Ideas » The Latest Products Collection of Powder Coating Additives

The Latest Products Collection of Powder Coating Additives

Views: 0     Author: Site Editor     Publish Time: 2022-09-09      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button
The Latest Products Collection of Powder Coating Additives

At kingcham ,we provide a wide range of powder coating additives products to satisfy all the powder coating industry's and applications' needs. Our manufacturers always rely on continuous innovation and development in our high-quality products to provide customers with more competitive products and solutions.

Additive collection :

1-Matting agent

2-Leveling brightener

3-Antioxidant

4-Accelerator

5-Charge regulator

6-Hardener

7-degassing agent



Matting agent

Texturing Agents of powder coating additives provide consistent and uniform texture. Powder Tex fibrillates during the extrusion process, and has very high oil absorption and different amount of gloss. Have two types of matting agent based on uses which are an indoor and outdoor mating agent for example :


1-Indoor Matting Agent M-21  a Modified resin and catalyst Above 4° gloss, contains a small amount of wax, consumes epoxy resin E-12 ratio of 1:2.3, excellent

powder storage stability, full coating levelling.

M70

2-Outdoor matting agent M-70 is a Modified resin and catalyst For a pure polyester/TGIC system with gloss above 10°, the consumption ratio of TGIC is 1:20, excellent anti-yellowing property, and extremely low baking smoke.

M21-1-(2)



Leveling brightener

3-Brightener KC701B is Acrylic Copolymer to Adjust the surface tension, has a good wetting effect on the substrate, pigments and fillers, effectively eliminates shrinkage and promotes levelling.

KC701B-1

4-General solid levelling agent KC758 is a Silica-adsorbed acrylic polymer used in powder coating additives, A general-purpose solid leveling agent with an active content of about 60%, uniformizes the surface tension of the coating, reduces orange peel and eliminates pinholes, and improves the leveling performance and leveling performance.

KC758-1

Antioxidant


5-Antioxidant KC1020 is a Compound antioxidant with an Excellent anti-oxidation effect, good processing stability and long-term stability, and high-cost performance.


6-UV absorber KC1310 is a Benzophenone complex, It has excellent weather resistance, light colour, odourless, non-toxic, and good compatibility as powder coating additives. also has the greatest protective effect on the polymer, and helps to reduce the color, while delaying yellowing and blocking the loss of physical properties.


Accelerator


7-Curing accelerator KC5210 Quaternary ammonium salt  It can promote the ring-opening reaction of epoxy and carboxyl groups, with a very low dosage, and antiyellowing. It can reduce the curing temperature of the system, significantly improve the incomplete of the curing system in powder coating additives, improve the impact resistance of the coating film, and increase the adhesion of the substrate.


8-Curing accelerator KC5230 Onium salt It can promote the ring-opening reaction of epoxy and carboxyl groups, with a very low dosage, and antiyellowing. It can reduce the curing temperature of the system, significantly improve the incomplete curing of the system, improve the impact resistance of the coating film, increase the adhesion of the substrate, and the anti-yellowing temperature can reach 230 ℃.

KC5230-(2)

Charge regulator

10-High-efficiency booster KC3020 It is Organic fatty acid and It can effectively increase the charge amount of powder particles and increase the powder loading rate. In addition, the charge on the surface of the workpiece is leaked out in time when the powder is sprayed, thereby overcoming the electrostatic shielding effect and making the corners or the inner surface easy to powder.

KC3020

11-Special power booster KC3060 is a Flake power booster The effect is better than KC3020, not only can increase the powder on the plane workpiece, but also improve the powder on the right angle and groove of the workpiece。

KC3060

12-Antistatic agent KC3090 is a Non-ionic surfactant  Mainly used to eliminate surface static electricity in various powder coatings. It is determined that the surface volume resistance of the coating can be reduced from 1014-16Ω to 108-10Ω after adding this product. And it can prevent the establishment of direct current potential during spraying, and a uniform thickness of the coating can be obtained.

kc3090

Hardener


13-Pure polyester curing agent TGIC Triglycidyl isocyanurate is Triglycidyl isocyanurate and Carboxyl polyester is commonly used as a curing agent, which has good weather resistance and yellowing

resistance. It is mainly used as a curing agent for carboxyl-containing polyester and carboxyl acrylic resin

powder coating additives.


13-Pure polyester curing agent KC552 (HAA) is a β-hydroxyalkyl amide TGIC substitute products have the characteristics of non-irritating to the skin and fast curing speed, and the prepared powder coating has outstanding outdoor performance.

HAA-KC552-1

Degassing agent


14-Benzoin is used as a degassing agent it is Excellent whiteness and crystallinity, eliminating pinholes in the curing process of powder coatings.

Pure Benzoin

15- Smoothing deaerator  KC9500  is used as a degassing agent it is Synthetic microcrystalline wax It can reduce the melt viscosity of the system and absorb volatile small molecules in the coating to escape to achieve the degassing effect. At the same time, it can improve the surface leveling and fullness, and improve the powder's wettability and dispersion of the substrate and pigments. This product has a high melting point, and the powder has a good looseness and good anti-caking performance.

KC9500

16-Efficient degassing agentKC961 is used as a degassing agent it is a Modified micronized wax that Significantly improves the defoaming properties of porous substrates, increases scratch resistance, and excellent yellowing resistance. It is especially suitable for galvanized sheets, cast iron parts and other workpieces, and can be used after mixing.

KC961

17-Efficient degassing agent KC9700 Modified micronized wax Reduce the surface tension of the coating, effectively preventing the porous substrate from foaming and pinholes. It has a very good defoaming effect on cast iron, cast aluminium galvanized and aluminium alloy substrates. It can replace the BYK961 defoamer.

kc9700


Texture agent


18-Floating agent KC4030P is an Acrylic polymer This product is in powder form and does not need to be processed and is convenient to use. Mainly used for fine art powder coatings. Through different application methods, various fine art patterns can be produced on the sprayed surface.

KC4030


19-Sand texture agent KC4700 is Fluoropolymer The fine-grained sand texture agent hangs. It offers performance advantages in powder coatings, such as ease of incorporation, excellent recoat adhesion and cake-free powder transfer.


KC4700



Wax powder

Wax additives are used to improve mar and abrasion resistance in coatings. Polytetrafluoroethylene (PTFE) is a very cost-effective texturing additive for powder coatings. It offers performance advantages in powder coatings, such as ease of incorporation, excellent recoat adhesion and cake-free powder transfer.


20-PTFE wax KC6100F is PTFE-modified polyethene wax, The particle size Dv50 is 5μm. This product has high hardness, better particle shape and a more concentrated particle size range, which can significantly improve surface hardness, slippage and friction resistance. It can be directly added with excellent performance.


KC6100f


Related Products

content is empty!

Kingcham is the leading global supplier of innovative powder coating additive companies that combine R&D, manufacturing, sales, and service.

QUICK LINKS

PRODUCT CATEGORY

GET IN TOUCH

PHONE

+86-551-68113128

EMAIL

sales@kingcham.com

ADDRESS

Room 1305 Jinqian Square , No. 4680 Jinzhai Road, Shushan District, Hefei, 230026, Anhui, China.
Copyright © 2022 Anhui Kingcham New Materials Co., Ltd.  All rights reserved. Support by Leadong Sitemap  皖ICP备14020930号