Outdoor Matting Agent M-61

Exterior Matting Agent M61

1. The product can promote the reaction of the system after being mixed with the base powder in a certain proportion.

2. The products have certain selectivity to polyesters, and the coating surfaces of different brands of polyesters are different. Excellent coating surfaces can be obtained for commercial brands of
polyesters, and some niche polyesters may have coating defects, so matching tests should be carried out before actual production.

3. There is no obvious extinction effect in the primid system.

Availability:



Inquire Add to Basket

Product Description

Outdoor Matting Agent M61

Product Description

Exterior Matting Agent M61

1. The product can promote the reaction of the system after being mixed with the base powder in a certain

proportion.

2. The products have certain selectivity to polyesters, and the coating surfaces of different brands of

polyesters are different. Excellent coating surfaces can be obtained for commercial brands of

polyesters, and some niche polyesters may have coating defects, so matching tests should be carried out

before actual production.

3. There is no obvious extinction effect in the primid system.

Main components

Technical parameters Wax and catalyst

Appearance: Light yellow powder

Bulk density: 550~650g/L

Product characteristics

The glossiness of coating film above 30 gloss, non-reactive, does not affect the wearability of coating film, smooth, delicate and plump surface, and the surface of dark coating film will show "wax feeling" when added with a large amount.

Usage Squeeze inside, adding 1%~4.5%.

Formula description

The formula shows that the increase of matting filler content is beneficial to matting.

Package and store

Polyethylene lined kraft paper bags, each bag weighs 25kg net, and keep them sealed.

Please store them in a cool and dry place, away from heat sources, and avoid direct sunlight.

The reasonable storage shelf life is 12 months.

Recommended formula

Materials	1	2	3	4
Excalibur SJ4ET	570

DSM P4600		570

Optimus NH3307			570

Guanghua GH2208				570
TGIC	42	42	42	42
KC701B	10	10	10	10
KC758	10	10	10	10
Benzoin	3	3	3	3
Extinction barium	327	327	327	327
Carbon black	8	8	8	8
M-61	30	30	30	30
Total	1000	1000	1000	1000
Extrusion conditions		95 ºC in Zone I and 120 ºC in Zone II
Curing condition		200 ºC * 12min/190 ºC * 15min

Gloss% @ 60 °	33	32	30	32