 |
Indoor matting agent M-30
Matting agent M30 for polyester/epoxy powder coatings
Suitable for polyester/epoxy mixed system with gloss above 10, 1: 1.5 epoxy resin consumption,excellent storage stability,excellent surface leveling and a small amount of wax.
1)Typical Properties:
Gloss range:10%above @60°;
High cost-performance with low dosage; React with epoxy by 1:1.5; Super stability;
Full and smooth film.
2) Incorporation and Processing Instructions
The product should be mixed with the resin, hardener, pigments, and other additives using a high-speed mixer and extruded along with all components.
Product Description
3)Recommended Levels
1-3%additive (as supplied) based on the total formulation when extruding with all formulation components. More dosage for lower gloss. The above-recommended levels can be used for orientation.
Optimal levels are determined through a series of laboratory tests.
Notes:
An appropriate amount of filler can improve the matting effect, which would influence the leveling.
An appropriate amount of accelerator can improve the impact resistance, which would influence the gloss and leveling.
| Material Safety Data Sheet : |  M30-MSDS Chinese.pdf |  M30-MSDS English.pdf |
| Technical Data Sheet : |  M30-TDS Chinese.pdf | M30-TDS English.pdf |
Indoor matting agent M-30
Matting agent M30 for polyester/epoxy powder coatings
Suitable for polyester/epoxy mixed system with gloss above 10, 1: 1.5 epoxy resin consumption,excellent storage stability,excellent surface leveling and a small amount of wax.
1)Typical Properties:
Gloss range:10%above @60°;
High cost-performance with low dosage; React with epoxy by 1:1.5; Super stability;
Full and smooth film.
2) Incorporation and Processing Instructions
The product should be mixed with the resin, hardener, pigments, and other additives using a high-speed mixer and extruded along with all components.
Product Description
3)Recommended Levels
1-3%additive (as supplied) based on the total formulation when extruding with all formulation components. More dosage for lower gloss. The above-recommended levels can be used for orientation.
Optimal levels are determined through a series of laboratory tests.
Notes:
An appropriate amount of filler can improve the matting effect, which would influence the leveling.
An appropriate amount of accelerator can improve the impact resistance, which would influence the gloss and leveling.
| Material Safety Data Sheet : | M30-MSDS Chinese.pdf | M30-MSDS English.pdf |
| Technical Data Sheet : | M30-TDS Chinese.pdf | M30-TDS English.pdf |