 |
Indoor Matting Agent M10
It is suitable for polyester/epoxy mixed system with gloss above 5, and some gloss can be as low as 3, which does not consume epoxy resin and reduces milling cost. No wax, full and delicate surface, high reactivity, low-temperature curing has little effect on gloss, but it is necessary to strictly control the stability of production material temperature.
Coating Additive Acrylic Polyester Resin Matting for Catalyst Coating Additive Indoor Matting Agent M10
Matting agent M10 for polyester/epoxy powder coatings
1)Gloss range:5%above @60°; Not react with epoxy; Not include wax;
Few fumes in the baking process;
Good performance after many extrusions; Full and smooth film.
2) Incorporation and Processing Instructions
The product should be mixed with the resin, hardener, pigments, and other additives using a high-speed mixer and extruded along with all components.
3)Recommended Levels
1-3% additive (as supplied) based on the total formulation when extruding with all formulation components. More dosage for lower gloss.
Leveling would be influenced by various fillers. More filler for a better matting effect.
The above-recommended levels can be used for orientation
| Material Safety Data Sheet : |  M10-Chinese.pdf | M10-English.pdf |
| Technical Data Sheet : |  M10-Chinese.pdf |  M10-English.pdf |
Indoor Matting Agent M10
It is suitable for polyester/epoxy mixed system with gloss above 5, and some gloss can be as low as 3, which does not consume epoxy resin and reduces milling cost. No wax, full and delicate surface, high reactivity, low-temperature curing has little effect on gloss, but it is necessary to strictly control the stability of production material temperature.
Coating Additive Acrylic Polyester Resin Matting for Catalyst Coating Additive Indoor Matting Agent M10
Matting agent M10 for polyester/epoxy powder coatings
1)Gloss range:5%above @60°; Not react with epoxy; Not include wax;
Few fumes in the baking process;
Good performance after many extrusions; Full and smooth film.
2) Incorporation and Processing Instructions
The product should be mixed with the resin, hardener, pigments, and other additives using a high-speed mixer and extruded along with all components.
3)Recommended Levels
1-3% additive (as supplied) based on the total formulation when extruding with all formulation components. More dosage for lower gloss.
Leveling would be influenced by various fillers. More filler for a better matting effect.
The above-recommended levels can be used for orientation
| Material Safety Data Sheet : | M10-Chinese.pdf | M10-English.pdf |
| Technical Data Sheet : | M10-Chinese.pdf | M10-English.pdf |