 |
| Quantity: | |
|---|---|
Chemical PTFE Wax KC6100F
High hardness and high melting point organic wax, good transparency, increased coating hardness, scratch resistance and anti-sticking, compared to ordinary polyethylene wax has a lower smoke effect. | |
The particle size Dv50 is 5μm. This product has high hardness, better particle shape and a more
concentrated particle size range, which can significantly improve surface hardness, slippage and friction resistance. It can be directly added with excellent performance.
1)Typical Properties:
High density, higher hardness; Better comprehensive properties, Size: Dv50=5μm; Superb hardness; Scratch-resistant.
2) Special Features and Benefits
KC6100F is a fine powder, which has good dispersion. Can be directly added to the powder coating through dry mixed.
3)Recommended Use
KC6100F suits for the powder coatings that require highly for hardness and scratch resistance properties. KC6100F is used in powder coatings based on polyester/TGIC pure epoxy and polyester/epoxy.
4)Recommended Levels
0.3-2% additive (as supplied) based on the total formulation when extruding or directly mixing with all formulation components. The above-recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
| Material Safety Data Sheet : |  KC6100F-Chinese.pdf |  KC6100F-English.pdf |
| Technical Data Sheet : |  KC6100F-Chinese.pdf | KC6100F-English.pdf |
Chemical PTFE Wax KC6100F
High hardness and high melting point organic wax, good transparency, increased coating hardness, scratch resistance and anti-sticking, compared to ordinary polyethylene wax has a lower smoke effect. | |
The particle size Dv50 is 5μm. This product has high hardness, better particle shape and a more
concentrated particle size range, which can significantly improve surface hardness, slippage and friction resistance. It can be directly added with excellent performance.
1)Typical Properties:
High density, higher hardness; Better comprehensive properties, Size: Dv50=5μm; Superb hardness; Scratch-resistant.
2) Special Features and Benefits
KC6100F is a fine powder, which has good dispersion. Can be directly added to the powder coating through dry mixed.
3)Recommended Use
KC6100F suits for the powder coatings that require highly for hardness and scratch resistance properties. KC6100F is used in powder coatings based on polyester/TGIC pure epoxy and polyester/epoxy.
4)Recommended Levels
0.3-2% additive (as supplied) based on the total formulation when extruding or directly mixing with all formulation components. The above-recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
| Material Safety Data Sheet : | KC6100F-Chinese.pdf | KC6100F-English.pdf |
| Technical Data Sheet : | KC6100F-Chinese.pdf | KC6100F-English.pdf |
